This bearing is used in equipment designed to measure liquid flow.
Previously, the impeller was mounted onto a metal bearing. However, due to concerns about corrosion caused by the liquid, a request was made to replace the bearing component with a plastic version.
As the liquid is alkaline and a certain level of rigidity is required due to the small diameter, PEEK was selected for its high stiffness and excellent resistance to alkaline environments.
In addition, we proposed integrating the impeller and bearing into a single component to reduce the number of parts.
As demonstrated in this case, we are capable of manufacturing bearings in non-standard shapes and sizes.
Whether you want to reduce the number of components for easier installation, create custom grooves tailored to your product, implement double-flange designs, combine two bearings into one, or add special cutouts—we can accommodate a wide range of custom bearing requirements.
Please feel free to contact us.
Examples of Custom Bearing Designs
Please refer to the following pages for past examples of custom-shaped bearings:
★ Integrated with Thread All-plastic cam follower bearing |
★ Integrated with Collar Plastic bearing for coil material transport |
★ V-groove on outer diameter Guide roller with integrated plastic bearing for plating equipment |
★ R-groove on outer diameter Grooved plastic bearing for plating equipment |
★ External thread Plastic bearing with external thread (tapped outer diameter) |
★ Internal thread Plastic bearing with internal thread (tapped bore) |
★ Two bearings combined into one Plastic bearing used in ampoule cleaning processes ※ Double-row design |
Related Pages
|
・Plastic Ball Bearings |
